Mid-USA

• Cruise-Mate is an easy to use lever operated throttle assist.
• Once installed, Cruise-Mate is extremely reliable and easy to operate.
• To set the throttle, simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set.
• Flip lever back (toward rear of bike) and throttle returns to normal operation.
• When adjusted properly, the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency.
• It is not a cruise control and will not maintain speed when going uphill.
• All internal parts are made from Stainless Steel.
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds.
• Lifetime Guarantee.

Ironbraid
Chrome Cruise Assist
Fits all Harley-Davidson^® Models 1996/Later (except 2014/Later Touring Models)
By: IRONBRAID INC

Custom Springer Rocker Studs Hardbody Wide Springers & Most Custom Wide Springers,Chrome
HARDBODY
Chrome Plated Rocker Studs (Set of 4)

Threaded diameter is 1/2"
Bearing surface 3/4"

Length of threaded part is 9/16”

Primary Cover Gasket,Outer St 1989/2006,Dyna 1991/2005 Rpls Hd 60539-94B

• Economically priced
• High quality for sure scaling
• Sold each

POWER HOUSE
iber with Silicone Bead
Primary Cover Gasket
Fits Softail 1989/2006 & Dyna 1991/2005
Replaces HD# 60539-94B

Performance Alternator Rotor Use With 38 Or 45 Amp Systems Rpls Hd 29999-97B & 29981-95
V-FACTOR
Standard Black Rotor
Fits Big Twin 1997/2005 with 38-45 Amp charging system
(Imported)

Cruisemate Installation Kit Use With 1982/L* W Throttle Cables Mfg# 9800

• Cruise-Mate is an easy to use lever operated throttle assist
• Once installed, Cruise-Mate is extremely reliable and easy to operate
• To set the throttle simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set
• lip lever back (toward rear of bike) and throttle returns to normal operation
• When adjusted properly the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency
• It is not a cruise control and will not maintain speed when going uphill
• All internal parts are made from Stainless Steel
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds
• Lifetime Guarantee

Ironbraid
Install Kit for 1982/Later with dual throttle cables
Note: All 2008/Later Road Kings & 2015/Later Softail require Installation Kit 42135

HARDBODY

Spring Kit for Springer Forks Use with Most Custom Springers Inc Springs, Rods, Seats & Nuts

Custom Springer Top Stem Nut Use With Most Custom Springers Chrome Plated
HARDBODY
Chrome Plated Top Tree Stem Nut

Harley-Davidson Front Fork Tubes Flt/Flh 84/99 Stock Length Rpls Hd# 45827-84

• All fork slider tubes are centerless ground from seamless aircraft tubing in either show chrome (USA) or hard chrome (Import)
• All fork tubes are sold in pairs and include spring spacers

Hard Chrome Plated
Stock 20 7/8 Length Set fits FLT, FLTC, FLTCU, FLHT, FLHTC, FLHTCU, FLHS, FLHR 1986/1996 with or without air forks
Replaces HD# 45827-84
2 US Length Set fits LST, LSTC, LST, LSTN 1986/1999
Replaces HD# 45930-86

• Cruise-Mate is an easy to use lever operated throttle assist.
• Once installed, Cruise-Mate is extremely reliable and easy to operate.
• To set the throttle, simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set.
• Flip lever back (toward rear of bike) and throttle returns to normal operation.
• When adjusted properly, the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency.
• It is not a cruise control and will not maintain speed when going uphill.
• All internal parts are made from Stainless Steel.
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds.
• Lifetime Guarantee.

Ironbraid
Black Cruise Assist
Fits all Harley-Davidson^® Models 1996/Later (except 2014/Later Touring Models)
By: IRONBRAID INC

Air Filter Element Sportster 1988/2003 Rpls Hd# 29331-96

• Engineered for increased performance
• Washable and reusable high flow 4-layer cotton element increases air flow while offering unmatched filtration for long engine life
• Not only will these filters increase horsepower in stock engines, they are a must when performance upgrades have been done your motorcycle
• Sold each

V-FACTOR
Air ilter Element, 1 5/8 width
Fits Sportster 1988/2003
Replaces HD# 29331-96

Flat Rear Fender 7" Wide For Wide Tire Rigid Frame & Custom Use

• Designed with strength in mind, these one-piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Raw Steel 7" wide flat fender
Fits Big Twin & Sportster Rigid frames

V-FACTOR

Chrome Plated 14" Axle, 3/4" Diameter(Imported)

Dimension A - 14"

Dimension B - 12-2/4"

Springer Neck Stem Sleeve Cp Use With Most Custom Springers Sold Each
HARDBODY
Chrome Plated Neck Stem Sleeve (Sold Each)

• Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Kraft Tech
Raw Steel 8" wide flat fender
Fits Big Twin & Sportster Rigid frames

Springer Shock Absorber, Chrome FXSTS 1988/2006 Replaces HD# 54483-88

• High quality OE replacement springer shock absorber
• Sold Each

V-FACTOR
Chrome Plated Shock Absorber
Fits XSTS 1988/2006
Replaces HD# 54483-88

Clutch Pushrod & Snap Rings For Use With #71204 Kit Repls Hd# 36818-03

V-FACTOR
Replacement Clutch Pushrod & Snap Rings
Replaces HD# 36818-03

Ignition Part,Condenser All Point Type Ignition W/O Magneto Rpls Hd 32726-30A
High quality ignition condensers meet or exceed OEM specifications.V-FACTOR
Fits all Points Type Ignition (except Magneto models)
Replaces HD# 32726-30A
(Imported)

Starter Relay,Delco Remy Style Bt 67/E68,Sportster 65/73 Replaces Hd 71455-67C

• High quality Delco Remy style relay

V-FACTOR
Fits Big Twin 1967/Early 1968 & Sportster Late 1971/1974
Replaces HD# 71455-67C

Oil Tank Dipstick W/Tempgauge Sportster 2004/Later* Rpls Hd 63023-05

• Monitor your oil temperature with this chrome dipstick/temperature gauge
• Design of this dipstick provides a grip area for easy removal

V-FACTOR
Chrome Plated Dipstick
Fits Sportster models 2004/Later
Replaces HD# 63023-05

Wheel,Bearing I.D. Reducer Stl 3/4" Axle,W/1"Id Ball Bearing 1" Id Bearing To 3/4" Id

• Reducers are designed to convert wheels with 1 I.D. sealed (ball type) bearings to a ³/₄ O.D. axle

HARDBODY
Stainless Steel Pair
(Imported)

Lower External Spring Set Use With Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Lower External Spring Set (Sold as Pair)

Debris Deflector, Stainless Fits Softail 2000/2007 Rpls Hd# 60476-00A

• Designed to help keep the road grime and debris off the oil tank, starter motor and transmission area
• These stainless steel debris reflectors replaces the OE black plastic one
• or ease of cleaning and flashy good looks, the oil tank side is semi-polished while the more focal wheel side is highly polished

HARDBODY
Stainless Steel Deflector
Fits Softail 2000/2007 & all HARDBODY Softail style rear forks
Replaces HD# 60476-00A

Coil High Performance Rd 4 Ohm 12 Volt All Models 1965/1979 W/Mount Cp Rpls Hd 31609-65A
These high performance dual fire round coils produce 10% greater output capacity than stock and include a seat post type mount. The two 7mm copper core spark plug wires measure 23 long and can be cut to the desired length. The screw-on tower caps include rubber seals to keep any moisture out. V-FACTOR
Chrome Plated, 12 volt, 4 OHM
Fits Big Twin 1965/1979
Replaces HD# 31609-65A
(Imported)

Rocker Arm,Shims "010" Thick Shovelhead 66/Later Use To Set End Clearance Mfg #2253
HARDWARE
Rocker Arm Shim, .010 Thick
Fits Shovelhead all years
Package of 10

Fuel & Oil Line,Clear Vinyl 5/16"Id X 9/16"Od 1/8"W 25 Ft Nylon Braid Reinforced

• ¹/₈ wall, open mesh nylon braiding has been incorporated within the clear vinyl, producing a pliable hose which will not shrink or harden
• Withstands high temperatures and pressures up to 750 PSI
• Highly resistant to fuel, oil and custom blended fuels

V-FACTOR
⁵/₁₆ I.D. x ⁹/₁₆ O.D. fuel & oil line
25 foot roll, (Imported)

Oe Style Gas Cap Touring Models 1992/Later* Rpls Hd 61274-92

• OE style black plastic gas cap
• or use with Touring models with gas tank fuel doors
• Sold each

V-FACTOR
Black Plastic OE style Gas Cap
Fits Touring models 1992/Later
Replaces HD# 61274-92